Vantage 500 Smart Swing Gate Centurion
Vantage 500 Smart Swing Gate Centurion - Image 2
Vantage 500 Smart Swing Gate Centurion - Image 3
Vantage 500 Smart Swing Gate Centurion - Image 4

Vantage 500 Smart Swing Gate Centurion

Compare

Vantage Features

The VANTAGE linear swing gate motor is available in two models with actuation strokes of 400mm and 500mm. The VANTAGE has been designed to automate a wide variety of swing gates, from single light-domestic gates to heavy industrial double swing gates.

The fail-safe and fully redundant Position and Collision Detection System has been designed and tested to set the standard in safety of operation and to provide an unparalleled level of durability and reliability.

  • Specific 6 Core Vantage Cable to link the slave to the control panel when must be used as a double swing kit.
  • Exceptionally easy system setup via LCD user interface
  • Supports inward- and outward-opening gates without needing mechanical end stops
  • High push force
  • Full position control
  • Fast (and adjustable) operating speed, with smooth acceleration and deceleration
  • Safe anti-crushing protection
  • Multiple operating features including Intruder-detection Alarm Modes (a world first)
  • Onboard code-hopping multichannel receiver with selective add and delete
  • Battery backup for uninterrupted operation during power failures
  • Fast operating speed, with smooth acceleration and deceleration

KSh 98,000.00 plus 16% VAT

Vantage 500 Smart Swing Gate Centurion

VANTAGE linear swing gate motor for domestic and industrial gates. VANTAGE gate automation comes standard with battery backup offers a quick and easy (not to mention good looking) installation. It is an exceptionally strong set of operators for gates up to 4m wide, per leaf (consult specifications for further details). Boasting tough-as-nails die-cast aluminium construction throughout, a grade 304 stainless steel wormshaft for the ultimate in reliability and durability and with sophisticated electronics for smooth, safe operation, VANTAGE gives you everything you need to swing the future your way.

Key Design Features

  1. Aesthetically pleasing modern design;
  2. Custom molded seals.
  3. A focus on DOSS / Sensor with surface mount LEDs, triple testing during assembly and relocation to the top of the operator to avoid moisture ingress
  4. The worm shaft is manufactured from 304 Stainless Steel.
  5. The wiring harness has a molded strain relief which is assembled from the inside of the casting (cannot be pulled out), which provides much greater strain and flex relief.
  6. Common captive stainless steel screws (M6 x 25mm) making disassembling and maintenance a lot easier;
  7. Modular internal compartments which make replacing parts a lot easier
  8. The rear tilt adaptor (mechanical fuse) has been designed and the unit is rather mounted on the far stronger casting.
  9. Drainage slots are designed into the casing top cover if rain does find a way under the casing top cover;
  10. The VANTAGE is virtually a drop-in replacement for VECTOR operators.
Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Vantage 500 Smart Swing Gate Centurion”

There are no reviews yet.

Related products

Select at least 2 products
to compare